Surface mount IR Modules (Sensors) for Retro Shooter
Add Retro Shooter guns to your arcade the easy way with our IR Module kit.
Our sensors use 12 volt input for maximum emitting power and easy compatibility with existing Arcade wiring.
1. IR Modules only: Includes four (4) IR modules and Y cable for plugging into an existing 12 volt input OTHER than your Retro Shooter AC adapter. For the best implementation in most cases, look at including the Recoil Power Kit which has an AC adapter supplied.
2. Recoil Power Kit: Move the gun recoil to separate power including a switch for convenient quick on / off recoil settings. Includes 12 volt power adapter.
3. IR Modules and Recoil Power Kit: Use this kit for adding Retro Shooter to most cabinets. Includes 3 way splitter cable to power the IR modules, your LCD display (or other 12 volt items) and the Retro Shooter Console. Plus the full Recoil Power Kit.
To toggle between two front ends for your guns and screen, ie. a Retro Shooter console and our mod kits, or a PC build - select our USB/HDMI switcher for a one button press to switch between them. See videos below for more details.
Installing the IR Modules:
With most Arcade1ups, for the top IR modules, you can actually just push the screen back slightly from the front and slip our very small connector through the crack, position it approximately, plug in the IR Module and stick it into place. Then by pushing the screen back slightly again, pull the black wire tight and it will be almost invisible.
For the bottom two IR modules, simply remove or slide back the control deck, position the modules and put the control deck back into place.
You can also drill through your bezel as seen in the video below.
Recoil Power Kit and other Retro Shooter Tips
Quick test with A1up Star Wars: