Welcome to our store! If you are on our ALP Backbox waitlist, feel free to contact us to see if we can get an order into production for you.
Welcome to our store! If you are on our ALP Backbox waitlist, feel free to contact us to see if we can get an order into production for you.
Cart 0

T2 Retro Shooter Integration Kit

*** WORK IN PROGRESS! ****

We will be updating this page with instructions for getting the most out of your T2 Retro Shooter Integration Kit.

The are 3 main version of the T2 Integration Kit available: A kit to repurpose the stock A1up deck, our replacement Selector Deck and our replacement Ultimate Deck. The two replacement decks install basically the same, with the exception of mounting the side holsters. The Stock Deck requires transferring the control wires from the stock encoder to our new replacement encoder board.

 

Stock T2 Deck Installation:

PDubs takes us through the entire Stock Deck install using the new sensors with the stock A1up 17" screen.

 

Selector/Ultimate Deck Installation:

PD7 shows how to install the Selector Deck into his T2 Arcade

 T2 IR Module Kit install and 19" Screen upgrade:

Watch some gameplay by PD7:

 

TIPS and other Info:

There are two different T2 encoder boards that we have available: Basic and Deluxe. Both encoder boards support full navigation and controls with the Retro Shooter console both in normal and lightgun games. Most other controllers do NOT work in lightgun games.

The Basic encoder board supports one joystick, start and coin/select for Player 1 and Player 2, and four Player 1 action buttons.

The Deluxe encoder board supports a joystick, eight action buttons plus start and coin/select for both Player 1 and Player 2.

There are many controller features and options built in.

Selector Deck:

The Selector Deck comes with a feature to allow for 4 buttons to be assigned to Player 1. Those extra buttons are: C = Player 2 START and D = Player 2 COIN.

To toggle to this 4 button mode, simply hold Player 1 START and Player 2 START and push the stick to the RIGHT. This allows for playing stick games that require 3 or 4 buttons. This can be done at any time the arcade is on.

To return to the default 2 button mode, hold Player 1 START and Player 2 START and push the stick to the LEFT.

Ultimate Deck:

The Ultimate Deck comes with a feature to change the button assignment to be better suited for 4 button games. By default, the button assignment is:

D  E  F

A  B  C

To toggle to this 4 button mode, simply hold Player 1 START and Player 2 START and push the stick to the RIGHT. The new button assignment will be:

C  D  E

A  B  F

There is also a third mode that inverts the top and bottom rows. Hold Player 1 START and Player 2 START and push the stick to the RIGHT for a second time. The new button assignment will be:

A  B  C

D  E  F

To return to the previous modes, hold Player 1 START and Player 2 START and click the stick to the LEFT as many times as required.

Mode 1 will be the default every time you power on.