All prices in USD. SHIPPING COST CHANGE for US shipments: Orders up to $50 is $30 shipping. Up to $100 is $20 and up to $150 is $10. Over $150 is free for most items. No tariff cost to US. Confirm shipping cost at Checkout. Order ship times vary between 1 day and 4+ weeks depending on product(s) ordered.
Cart 0
All prices in USD. SHIPPING COST CHANGE for US shipments: Orders up to $50 is $30 shipping. Up to $100 is $20 and up to $150 is $10. Over $150 is free for most items. No tariff cost to US. Confirm shipping cost at Checkout. Order ship times vary between 1 day and 4+ weeks depending on product(s) ordered.
Cart 0

Racing Cab Deck Install

Installing the GRS Yoke into the Yoke Control Deck:

 To install the Racing Wheel or Yoke deck into the Racing Cab, here is a quick supplementary video to the main Racing Cab install instructions.

 Cables from the Control Decks will be labelled and may include:

1. USB Extenders and Hub - plug that into the gaming box or your PC

2. 12 Volt power in - Plug the AC adapter from the wall here.

3. 12 Volt power out/marquee - Connects to the marquee and, using a Y splitter, to the voltage converter if using a Gaming Box.

4. The amp, if purchased, will have left and right speaker wires and also the bass shaker connection. There is a 12 volt Audio In plug for a second AC adapter. There audio in 3.5mm cable is usually best connected to the audio port of your TV/monitor.

When finished, you can tidy up the cables along the inside corner.

With our new Racing PC, there is a bracket supplied that can be used to mount the PC as you can see in this short video:

To autostart the PC with the Racing Deck power button, you MUST have the marquee turning on with the deck power button and that AC adapter plugged into the White port. Use a Y splitter cable to power the marquee with the same adapter as the Racing Deck.